2. Position forward end of hitch driveline (A) onto forward
swivel gearbox shaft and push onto shaft.
Figure 4.168: Forward End of Hitch
3. Position
shaft
end
of
hitch
driveline
onto
center support.
4. Install two long bolts (A) and three short bolts (B)
exactly as shown.
Figure 4.169: Long and Short Bolts
5. Install
fl
ange (A).
6. Ensure the distance (B) between the tip of the
shaft and the front face of the center support is
5-1/2 in. (+/- 5/32 in.) (140 mm [+/- 4 mm]).
Figure 4.170: Flange Installed at Center Support
169820
196
Revision A
