3. Secure two curtain brackets (A) to center shield using
two M10 carriage head bolts (B) and nuts.
4. Torque bolts (A) to 30 ft
·
lbf (40 N
·
m).
Figure 4.92: Inboard Curtain Attached to
Mower Conditioner
Removing Outboard Curtains
The procedure for removing outboard curtains is the same for both sides.
1. Open cutterbar door.
Refer to
Figure 4.93: Cutterbar Doors
2. Remove four cap screws (A), nuts, and large washers
securing outboard curtain to endsheet.
Figure 4.94: Left Side Endsheet
169820
165
Revision A
