CAUTION
Exercise caution when working around the blades.
Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
5. Use a spirit level to ensure the cutterbar is
level in both directions.
Raise or lower mower
conditioner accordingly.
Figure 4.34: Spirit Level on Cutterbar
6. Remove oil level inspection plug (A) and O-ring (B)
from cutterbar.
7. Add SAE 90 lubricant if required (oil level must be up
to the bore). Refer to
8. Check O-ring (B) for breaks or cracks and replace
if necessary.
9. Install plug (A) and O-ring (B). Tighten securely.
Figure 4.35: Inspection Plug and O-Ring
169820
137
Revision A
