6. Position driveline (A) onto tractor power take-off (PTO).
7. Pull back collar (B) on driveline (A), and push driveline
until it locks. Release collar.
8. Route safety chain (C) from mower conditioner through
chain support (D) on drawbar hitch adapter and around
tractor drawbar support. Lock hook on chain.
NOTE:
If the tractor has a three-point hitch, lift the links as
far as possible to prevent damage to the hitch.
Figure 3.25: PTO Driveline
9. Raise jack (A), and remove pin (B).
Figure 3.26: Hitch Jack
10. Move jack (A) to storage position on top of hitch, and
secure with pin (B).
11. Proceed to
3.8.3 Connecting Hydraulics, page 49
.
Figure 3.27: Jack Storage
3.8.2
Attaching with Two-Point Hitch
Follow these steps to attach the Category II, IIIN, and III two-point hitches:
CAUTION
Shut off tractor, engage parking brake, and remove key before working around hitch.
169820
45
Revision A
