7. Move jack (A) to working position at front of hitch and
secure with pin (B).
8. Lower jack to take weight off tractor drawbar.
9. Disconnect safety chain (C) from drawbar and store on
mower conditioner hitch.
10. Pull back collar (D) on driveline, slide coupler off
tractor power take-off shaft, and rest driveline on hook
(not shown).
Figure 3.38: Driveline and Jack
11. Remove lynch pin (E), and remove clevis pin (D).
12. Raise mower conditioner hitch using jack (A) until pin
(B) disengages and clears drawbar hitch adapter (C).
Figure 3.39: Mower Conditioner Hitch
13. Replace clevis pin (B) and secure with lynch pin (A).
Figure 3.40: Mower Conditioner Hitch
169820
52
Revision A
