NOTE:
Arrow indicates forward direction.
1. Position the rotary de
fl
ector disc assembly as shown.
2. Use a 12 in. extension and 16 mm deep socket to
install the four M12 bolts (A) and washers that hold the
de
fl
ector disc in place. Torque to 63 ft
·
lbf (85 N
·
m).
Figure 4.124: Driven Rotary Deflector (Top View)
3. Lubricate spindle splines (A) with high temperature
extreme pressure (EP2) performance with 10% max.
Molybdenum Disulphide (NLGI Grade 2) lithium base
grease (cut away view of drum and tube shield shown
for improved clarity).
NOTE:
Do
NOT
use this grease for bearings.
4. Insert driveline (B) at an angle and guide it past hub
drive (C) and drum (D).
5. Insert splined spindle end (A) into splined bore of
driveline (B).
Figure 4.125: Vertical Driveline (Cut Away
View Shown)
6. Place a bead of Loctite
®
Blue 242 around threads, and
install four M12 hex
fl
ange head bolts (A) and spacers
to secure driveline assembly (B) to hub drive (C).
Torque bolts to 70 ft
·
lbf (95 N
·
m).
Figure 4.126: Driveline Hardware
169820
178
Revision A
