1. Lower mower conditioner fully, turn off engine, and
remove key.
2. Remove the right driveshield (A) (refer to
Removing Driveshields, page 227
).
Figure 4.205: Right Driveshield
Checking Conditioner Gearbox Oil Level
3. Clean around oil level plug (A) on inboard side
of gearbox.
4. Remove oil level plug (A), and check that oil level is
even with the hole.
5. Top up oil level with SAE 85W-140 gear oil if necessary.
6. Replace oil level plug (A) and tighten.
Figure 4.206: Oil Level Plug
169820
212
Revision A