7. Ensure bearing lock collar is on the backside of the
support bracket, and install ball bearing (C),
fl
ange (B)
with grease
fi
tting (D), and
fi
ve nuts (A).
IMPORTANT:
Grease
fi
tting (D) must be positioned 90° from
long bolts as shown.
Figure 4.171: Flange
8. Install spacer (A) with cutout in spacer aligned with
grease
fi
tting (B).
Figure 4.172: Spacer Installed at Center Support
9. Position metal plate (B) on center support.
10. Apply Loctite
®
243 Blue and secure metal plate (B)
using two nuts (A) while ensuring loop (C) on metal
plate is positioned on lower side as shown.
11. Torque nuts (A) to 15 ft
·
lbf (20 N
·
m).
Figure 4.173: Metal Plate Attached to
Center Support
169820
197
Revision A
