1. Torque wheel bolts to 120 ft
·
lbf (160 N
·
m) using the
tightening sequence shown.
NOTE:
Whenever a wheel is installed, check torque
after one hour of operation.
Figure 4.226: Tightening Sequence
Removing Wheels
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Place blocks (A) under opposite wheel to prevent
machine from moving if mower conditioner is not
attached to towing vehicle.
2. Position jack under frame leg (B).
3. Loosen wheel bolts slightly.
4. Operate jack to raise wheel off ground.
5. Place blocks or a stand under frame leg.
6. Remove wheel bolts and remove wheel.
Figure 4.227: Transport Wheel
Figure 4.228: Field Wheel
169820
221
Revision A
