1. Raise mower conditioner fully, stop engine, and
remove key.
2. Loosen bolts (C) and remove bolts, nuts, and
washers (D).
3. Raise (A) or lower (B) skid shoe.
NOTE:
Skid shoes have two adjustment settings: Fully
raised (A) or fully lowered (B).
4. Reinstall and tighten bolts, nuts, and washers (D).
5. Tighten bolts (C).
NOTE:
13-foot mower conditioners have one skid shoe
per side and 16-foot mower conditioners have
two skid shoes per side.
6. Check mower conditioner
fl
oat (refer to
).
7. Adjust mower conditioner angle to desired working
position using the machine's mower conditioner angle
controls. If angle is not critical, set it to mid-position.
Refer to
3.16.2 Mower Conditioner Angle, page 77
Figure 3.86: Skid Shoes
169820
79
Revision A
