13. Remove the M20 nut (A), washers, and hex head
bolt (B) securing carrier leg (C) and
fl
oat spring arm (D)
to header at right end of header.
14. Move
fl
oat spring arm (D) clear of conditioner and
remove bolt (B).
Figure 4.260: Right Side of Carrier
15. Remove the M20 nut (A), washers, and hex head
bolt (B) securing carrier leg (C) to header at left end
of header.
Figure 4.261: Right Side of Conditioner
16. Remove forward pin (A) connecting center-link (B)
to anchor (C) and separate center-link from anchor.
Reinstall pin in anchor to store.
17. Remove forward pin (D) and four washers (E) attaching
indicator links (F) to anchor (B). Reinstall pin and
washers in anchor to store.
18. Secure center-link and indicator links to carrier frame
with a strap or wire to prevent them from contacting the
header during separation.
Figure 4.262: Center-Link and Indicator Links
169820
237
Revision A