9. Slide shield away from gearbox.
10. Loosen nut (A), use a hammer to release driveline from
taper pin lock, and pull driveline off gearbox shaft.
Figure 4.181: Driveline and Gearbox
11. Remove driveline guard if necessary.
Refer to
Removing Driveline Guard, page 204
.
Installing Clutch Driveline
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine, and remove key from ignition.
2. Install driveline guard onto driveline (if previously
removed). Refer to
Installing Driveline Guard, page
.
3. Position driveline to the gearbox shaft as shown, install
tapered pin into yoke, and secure with nut (A). Torque
to 110 ft
·
lbf (149 N
·
m).
Figure 4.182: Driveline and Gearbox
169820
201
Revision A
