4.6.4
Driveline Guard
Removing Driveline Guard
WARNING
Do NOT operate the machine without the driveline guards in place and securely fastened.
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine, and remove key from ignition.
2. Remove driveline shield cone (A). Refer to
Removing Driveline Shield Cone, page 36
.
3. Remove driveline (B). Refer to the following:
•
Primary Driveline
:
•
Hitch Driveline
:
Removing Hitch Driveline, page
•
Clutch Driveline
:
Removing Clutch Driveline, page
Figure 4.187: Driveline and Driveline
Shield Cone
4. Remove three self-tapping Phillips head screws (A)
from base cone (B).
Figure 4.188: Phillips Head Screws Installed in
Base Cone
169820
204
Revision A
