4.5
Cutterbar
The cutterbar does not require regular maintenance
other than checking and changing the lubricant at regular
intervals. Refer to
4.4.1 Maintenance Schedule/Record,
.
IMPORTANT:
Check the lubricant level when the lubricant is warm.
If the lubricant is cold, idle the machine for about 10
minutes prior to checking.
Figure 4.32: 13- and 16-Foot Cutterbars
A - 13-Foot Cutterbar
B - 16-Foot Cutterbar
4.5.1
Cutterbar Lubrication
Checking Lubricant Level
IMPORTANT:
Check the lubricant level when the lubricant is warm. If the lubricant is cold, idle the machine for approximately
10 minutes prior to checking.
1. Park the mower conditioner on level ground.
2. Position
header
so
that
the
cutterbar
is
approximately level.
DANGER
Stop engine and remove key from ignition before
leaving operator’s seat for any reason. A child or
even a pet could engage an idling machine.
3. Shut down the mower conditioner and remove key.
4. Open cutterbar doors.
Figure 4.33: Cutterbar Doors
169820
136
Revision A
