Lotus 2005 Elise Page 25 Owner'S Handbook Manual Download

Page: 25 / 205

belt, even with airbags. Sit as far back from the steering

wheel as is comfortable, whilst ensuring that full control

can be maintained.

• Airbags plus lap-shoulder seat belts offer the best

protection for adults, but not for young children and

infants. Neither the car’s seat belt system nor its

airbag system is designed for them. Young children and

infants need the protection that a child restraint system can

provide. See later section on ‘Child Restraints’.

• If an object is between a person and an airbag, the bag

might not inﬂate properly or it might force the object into

that person causing death or serious injury. The path of

an inﬂating airbag must be kept clear. Don’t put anything

between an occupant and an airbag, and don’t attach or

put anything on the steering wheel hub or on or near any

passenger dashboard air bag covering.

• Do not lean against the inside of the doors; always hold

the steering wheel by the outer rim; never rest your hands

on the airbag panel.

• Never transport heavy objects on or in front of the pas-

senger seat.

• Give your passenger all of the information in this sec-

tion.

• Do not attempt to de-activate the airbags, or make any

other changes to the wiring or components of the airbag

system. Do not undertake any wiring for electrical ac-

cessory equipment in the vicinity of the airbag wiring

harnesses. Doing so may disable the airbag system, or

cause its unintended deployment.

• Adjust the driver’s seat to ensure that your chest is at

least 10 inches (250mm) from the steering wheel.

• If the airbag trim cover on the passenger side of the dash-

board is accidently knocked off, the passenger airbag will

not operate correctly. Improper protection could result

in death or serious injury to a passenger in a crash. Do

not attempt to reﬁt or repair the trim cover, but have the

fault rectiﬁed immediately by your dealer.

Airbag Tell Tale

There is an airbag warning light (‘tell tale’) on the instrument

panel which shows the airbag symbol. The system checks the

following airbag electrical circuits for malfunction:

g & S

ty R

oh_croft_InD.indd 23

20/05/2004 07:58:45

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands