manualshive.com logo in svg

Lotus 2005 Elise, Owner'S Handbook Manual

The Lotus 2005 Elise Owner's Handbook Manual is a comprehensive guide that provides detailed instructions and essential information about the iconic sports car. This manual is available for download absolutely free from our website, allowing you to access it anytime, anywhere. Get your hands on this essential manual today at manualshive.com.

Share
Download
background image

SEATING & SAFETY RESTRAINTS

Seats

On  delivery  of  the  car,  first  remove  the  protective  plastic 

seat covers, if this has not already been done, and dispose of 

safely.

To adjust the fore/aft position of the driver’s seat, raise the 

lift bar beneath the front of the seat, and slide to the position 

required. Ensure that the catch is fully engaged after adjustment 

by attempting to slide the seat without touching the lift bar. Note 

that the passenger seat position is fixed and cannot be adjusted, 

and that the backrest angle of both seats is fixed, and cannot 

be reclined.

 WARNING:

•  Sit as far back from the steering wheel as is comfortable, 

whilst ensuring that full control can be maintained. Sit-

ting too close to an airbag can result in serious injury or 

death if the airbag inflates.

•  Ensure that your chest is at least 10 inches (250mm) from 

the steering wheel.

•  Do not attempt to adjust the seat position whilst driving 

as this could adversely affect your control of the car. 

•  Ensure that no persons or objects will be trapped when 

adjusting the seat.

Lumbar Support (if fitted): On seats equipped with adjustable 

lumbar support, an inflator ‘bulb’ (A) and air release button (B) 

ohs64a

SEAT ADJUSTMENTS

S

e

a

ti

n

g & S

a

fe

ty R

e

s

tr

a

in

ts

17

oh_croft_InD.indd   17

20/05/2004   07:58:43

Summary of Contents for 2005 Elise














































































































































































































Reviews:

No comments

Related manuals for 2005 Elise

Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
PAC SWI-RC Installation Instructions preview
SWI-RC
Brand: PAC Pages: 4
PAC RP4-CH11 Manual preview
RP4-CH11
Brand: PAC Pages: 4
PAC BCI-CH41 User Manual preview
BCI-CH41
Brand: PAC Pages: 8
PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Toyota YARIS LIFTBACK 2009 Quick Reference Manual preview
YARIS LIFTBACK 2009
Brand: Toyota Pages: 13
Westfalia 316 145 Manual preview
316 145
Brand: Westfalia Pages: 71
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Bestop 51252 Installation Instructions preview
51252
Brand: Bestop Pages: 4

Brands by name

Popular brands

Load more brands