Lotus 2005 Elise Page 10 Owner'S Handbook Manual Download

Page: 10 / 205

properly restrained. Children, and short adults are at the great-

est risk. Be sure to follow all instructions and warnings in the

handbook (See page 21 to 27).

Don’t Drink and Drive

Alcohol and driving don’t mix. Even one drink can reduce your

ability to respond to changing conditions, and your reaction time

gets worse with every additional drink. So don’t drink and drive,

and don’t let your friends drink and drive, either.

Control Your Speed

Excessive speed is a major factor in crash injuries and deaths.

Generally, the higher the speed the greater the risk, but serious

accidents can also occur at lower speeds. Never drive faster

than is safe for current conditions, regardless of the maximum

speed posted.

Keep Your Car in Safe Condition

Having a tire blowout or a mechanical failure can be extremely

hazardous. To reduce the possibility of such problems, check

your tire pressures and condition frequently, and perform all

regularly scheduled maintenance (see separate Maintenance

Record booklet).

Safety Features

Your car is equipped with many features that work together

to protect you and your passenger during a crash. The Lotus

Elise has been designed to comply with applicable safety

regulations.

The Elise has passive safety features which include:

• A cockpit tub surrounded by substantial chassis side

frames.

• Energy absorbing front composite ‘crash structure’.

• Energy absorbing rear steel ‘crash structure’.

• Side sill foam pads.

• A seat belt mounting frame incorporating a roof hoop

• Extruded aluminium door beams.

• A collapsible steering column.

• Airbags for both driver and passenger.

Active safety features include:

• Lap and diagonal inertia reel seat belts with impact sensing

pre-tensioners.

ty I

oh_croft_InD.indd 8

20/05/2004 07:58:41

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands