Lotus 2005 Elise Page 12 Owner'S Handbook Manual Download

Page: 12 / 205

• Follow the Maintenance Schedule and keep the car in good

condition.

• Never leave young children unattended in the car.

• Read and take account of all

WARNINGS

in this hand-

book.

Owners should note that the only approved extras and modi-

ﬁcations are those which are speciﬁed by Lotus and carried out

by Lotus or by an authorised dealer. Lotus does not accept

any liability whatsoever for defects which arise from extras or

modiﬁcations which are not Lotus approved.

WARNING:

Inexpert or unapproved modiﬁcations or additions to

the car could adversely affect the handling of the car and

the operation of its safety equipment. Ensure only modiﬁ-

cations speciﬁed by Lotus are undertaken by authorised

dealers. Failure to comply with this may result in a crash in

which you and others may be killed or seriously injured.

REPORTING SAFETY DEFECTS

If you believe that your car has a fault which could cause a

crash, injury or death, you should immediately inform the Na-

tional Highway Trafﬁc Safety Administration (NHTSA) in addition

to notifying Lotus Cars USA, Inc. 2236 Northmont Parkway,

Duluth, Georgia 30096. Tel: 770 476 6540.

If NHTSA receives similar complaints, it may open an inves-

tigation, and if it ﬁnds that a safety problem exists in a group

of cars, it may order a recall and remedy campaign. However,

NHTSA cannot become involved in individual problems between

you and your dealer, or Lotus Cars USA, Inc.

To contact NHTSA, you may either call the Auto Safety Hotline

toll-free at 1 (888)-327-4236 (or 366-0123 in Washington, D.C.

area) or write to: NHTSA, U.S. Department of Transportation,

Washington, D.C. 20590. You can also obtain other information

about motor car safety from the Hotline.

Pre-delivery Inspection

Lotus strives at all times to provide the highest level of cus-

tomer satisfaction, and to this end, quality assessments are

made at several stages of the delivery process from factory to

customer. If necessary, repairs and replacements will be made

ty I

oh_croft_InD.indd 10

20/05/2004 07:58:41

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands