Lotus 2005 Elise Page 59 Owner'S Handbook Manual Download

Page: 59 / 205

Auxiliary Power Socket

An auxiliary power socket is ﬁtted in the centre trim shroud

below the oddments pocket on the rear bulkhead. The socket is

operative at all times, and is provided with a protective hinged

ﬂap.

The format of the socket allows a standard cigarette lighter

element to be used, or other electrical accessories requiring

this type of ﬁtting. Maximum current draw should not exceed

15 amps.

WARNING:

Do not leave small children unattended in the car since

careless interference with the power socket could be

dangerous and result in burn injuries or the initiation of

a car ﬁre.

ts & S

ohs144

AUXILIARY POWER SOCKET

oh_croft_InD.indd 57

20/05/2004 07:58:54

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands