Lotus 2005 Elise Owner'S Handbook Manual Download Page 170

Page: 170 / 205

within legal speed limits, or by performance of service, repair,

alteration or modiﬁcation of the car other than in accordance

with the recommended servicing and repair procedures of the

Company, or;

• by ﬁtting of a part, assembly, accessory or component not

conforming to speciﬁcations of the manufacturer of the motor

car.

7. EXCLUSIVE WARRANTY

This Limited Warranty and the Emission Control System War-

ranties are the only express warranties applicable to the car

which are given by the Company or the manufacturer of the

car. Subject to the provision of Paragraph 2 (Limitations of

Warranties), this warranty and the emission control system

warranties exclude all other obligations and liabilities of the

Company and the manufacturer of the car, whether they arise

in contract or tort, or otherwise to the fullest extent permitted

by law. Any and all other express warranties, representa-

tions, promises or statements shall be of no force or effect

as regards the Company, or the manufacturer of the car. If

any provision of this warranty is declared or made ineffective

or unenforceable by law, adjudication or otherwise, such

ineffectiveness or unenforceability shall not affect any of the

other terms and conditions of this warranty.

No person is authorised to change or modify this warranty,

and under no circumstances may this warranty be changed

or modiﬁed orally.

8. CUSTOMER ASSISTANCE

In order to obtain performance of any obligation under this

Limited Warranty, bring the Lotus car to any authorised Lotus

Dealer. Any such dealer is authorised to perform warranty

obligations. If you are unhappy with work performed on your

Lotus, speak ﬁrst with the dealer’s Service Manager, and then,

if necessary, with the General Manager or owner. If you still

cannot resolve a problem, contact:

Lotus Cars U.S.A. Inc.

2236 Northmont Parkway

Duluth, Georgia 30096.

Tel. 770 476 6540

d W

168

oh_croft_InD.indd 168

20/05/2004 07:59:22

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands