Lotus 2005 Elise Owner'S Handbook Manual Download Page 8

Page: 8 / 205

INTRODUCTION

Congratulations on your purchase of a Lotus Elise.

Welcome to the Lotus family. The Elise has been designed for

the discerning driver, and aims to provide fun motoring from a

lightweight, distinctively styled and efﬁcient package.

This handbook has been written for the owner/driver and

should be read before using the car, and then stored in the

car for ready reference, remaining with the car throughout any

subsequent changes of ownership.

The content includes

important safety information to protect you from injury,

explanations and instructions for operating the driving controls,

owner maintenance requirements, technical speciﬁcations, and

an explanation of the warranty. It is not intended to provide all

the technical information required for servicing, and should any

adjustment become necessary, owners are urged to contact

their Lotus dealer. It is a requirement of the warranty, and the

responsibility of the owner/driver, to ensure that servicing of the

car is carried out at the correct intervals.

An alphabetical index is provided at the back of this book to

help you ﬁnd information about any particular feature or topic.

The information and speciﬁcations included in this publica-

tion were correct at the time of approval for printing. Lotus has

a policy of continuous product improvement, and reserves the

right to discontinue or change speciﬁcation, design or equipment

at any time without notice and without incurring any obligation

whatsoever. You are urged to keep in regular contact with your

Lotus dealer to ensure that you may be kept informed of any

technical developments which may improve the speciﬁcation,

performance or safety of your car.

This handbook covers all Elise models for the North American

market, and may include descriptions of equipment and features

which are not ﬁtted on your particular car.

Your Lotus is intended to be used safely, in a manner

appropriate to the driving conditions and whilst obeying

local laws. Any alteration or misuse of the car, or ignoring the

instructions in this handbook could result in an accident causing

severe or fatal injury.

oh_croft_InD.indd 6

20/05/2004 07:58:40

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands