Lotus 2005 Elise Owner'S Handbook Manual Download Page 28

Page: 28 / 205

Child Restraints

WARNING:

Lotus strongly recommends that children are not car-

ried in the Elise due to the risk of death or serious injury

if the child is too close to the dashboard when the airbag

inﬂates.

Accident statistics show that children are safer when properly

restrained in the back seats of cars, an option unavailable on

this model. In addition, your car is equipped with a passenger’s

airbag which poses serious risks to children - particularly infants

and small children. If, nevertheless, a child is to be carried in the

car, the following notes are provided for guidance:

When a child is of a physical size whereby the standard

ﬁtment lap and diagonal seat belt will ﬁt satisfactorily, with the

belt positioned over the collar bone and against the centre of

the chest, the standard seat and seat belt should be used. If the

belt touches or crosses the child’s neck, the child should

NOT

be carried in the Elise.

WARNING:

• Children should not be carried in the Elise unless they

are large enough to be able properly to use the standard

seat belt without any child seat or booster seat.

• Child restraint systems (other than belt positioning

booster seats) are designed to be secured in the car seat

by the lap belt portion of the lap/shoulder belt. READ

ALL INSTRUCTIONS THAT ACCOMPANY THE CHILD

RESTRAINT OR BOOSTER SEAT.

• Infants who are unable to sit up by themselves,

unsupported, should NOT be carried in the Elise.

• Never put a rear-facing child seat in the passenger seat

of the Elise. If the airbag inﬂates, it can hit the child or

the back of the child seat with enough force to kill or very

seriously injure an infant.

• There is no provision on the Elise to switch off or disable

the passenger airbag.

WARNING:

Children who are not properly restrained can be killed

or seriously injured in an accident.

g & S

ty R

oh_croft_InD.indd 26

20/05/2004 07:58:45

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands