Lotus 2005 Elise Page 177 Owner'S Handbook Manual Download

Page: 177 / 205

Improper Maintenance and Use

a) An emission performance warranty claim may be denied on

the basis of non-compliance by a car owner with the Service

Schedule or Owner’s Handbook instructions for proper use.

b) When determining whether an owner has complied with the

written instructions for proper maintenance and use, Lotus

may require an owner to submit evidence of compliance with

those written maintenance instructions for which Lotus has

an objective reason for believing:

1. were not performed; and

2. if not performed could be the cause of the particular car’s

exceeding applicable emission standards.

c) Evidence of compliance with a maintenance instruction may

consist of:

1. a maintenance log book which has been validated at the

appropriate time or mileage intervals speciﬁed for service by

someone who regularly engages in the business of servicing

automobiles for the relevant maintenance instruction(s);or

2. a showing that the car has been submitted for scheduled

maintenance servicing at the approximate time or mileage

intervals speciﬁed for service to someone who regularly en-

gages in the business of servicing automobiles for the purpose

of performing the relevant maintenance; or

3. a statement by the car owner that he or she performed

the maintenance at the appropriate time or mileage interval

speciﬁed, including a showing

i) that the owner purchased and used proper parts, and

ii) upon request by Lotus, that the owner is able to perform

the maintenance properly.

d) The time/mileage interval for scheduled maintenance serv-

ices shall be the service interval speciﬁed for that part in the

Maintenance Schedule or Owner’s Handbook.

e) For certiﬁed parts having a maintenance or replacement inter-

val different from that speciﬁed in the written instructions for

proper maintenance and use, the time/mileage interval shall

be the service interval for which the part was certiﬁed.

l E

n W

175

oh_croft_InD.indd 175

20/05/2004 07:59:23

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands