Lotus 2005 Elise Page 150 Owner'S Handbook Manual Download

Page: 150 / 205

Lifting Your Car

WARNING:

• Using a lifting jack can be dangerous. If the car falls off

the jack, you or others could be seriously injured or killed.

NEVER get under a car when it is supported only by a

jack.

• Before raising the car with a jack:

- Turn off the engine;

- Firmly apply the parking brake;

- Engage ﬁrst or reverse gear;

- Securely chock all wheels not to be lifted.

• Use only those lifting points identiﬁed above. Jacking at

any other point, or with a jack improperly positioned, may

damage the chassis or body structure and/or jeopardise

safety.

Care must be taken when using a lifting jack or hoist to po-

sition the device only in one of the areas shown in the illustration.

Use a suitable rubber or timber pad to protect the chassis from

surface damage:

A; Identiﬁed by a blue sticker. Beneath crossmember ahead of

fuel tank bay. To be used one side at a time for wheel chang-

ing - lifts both wheels on one side.

Garage use with 4-point lift.

Beneath the front end of the right

or left hand main chassis rail, behind the front wheelarch.

ohs49

LIFTING POINTS

g & T

148

oh_croft_InD.indd 148

20/05/2004 07:59:18

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands