Lotus 2005 Elise Page 17 Owner'S Handbook Manual Download

Page: 17 / 205

CAR IDENTIFICATION

The Vehicle Identiﬁcation Number (V.I.N.) is a unique 17-digit

number used to identify the car for warranty, spares order-

ing and administrative purposes. For reference, the number

may be viewed from outside the car at the left hand bottom

corner of the windscreen. The number is also printed on

a label stuck to the inside of the chassis sideframe alongside

the driver’s seat. It is repeated on the certiﬁcation label on the

driver’s door jamb. This label contains tire pressure information.

The chassis frame is stamped with the V.I.N. in the right hand

front wheelarch area, viewable with the front wheels turned to

right full lock.

It is essential that the complete V.I.N. is quoted in any corre-

spondence concerning the car, or when ordering spare parts.

VIN LABEL ON DOOR JAMB

VIN LABEL ON CHASSIS

r I

ohs119a

ohs149

oh_croft_InD.indd 15

20/05/2004 07:58:42

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands