Lotus 2005 Elise Page 151 Owner'S Handbook Manual Download

Page: 151 / 205

Garage use with 4-point lift.

Do not use if the diffuser panel is

ﬁtted. Beneath the outboard end of the chassis crossmember

ahead of the rear wheelarches. Take care to position the jack

between the ﬁxing screws for the fuel tank bay perforated

undershield. Avoid the fuel tank brackets.

D; Do not use if the diffuser panel is ﬁtted. Beneath the rear

subframe, close to the lower wishbone rearmost mountings.

NOTICE: In order fully to exploit the beneﬁts of light weight, and

to maximise stowage space, the Elise has no provision for spare

wheel carriage or lifting jack. A temporary puncture repair facility

is provided in the form of a tire inﬂator aerosol (see page 124).

Fuel Tank Undershield

WARNING:

The perforated panel enclosing the underside of the fuel

tank bay, contributes to the structural rigidity of the chassis

frame. Do not use the car with this panel removed.

g & T

149

oh_croft_InD.indd 149

20/05/2004 07:59:18

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands