Lotus 2005 Elise Page 173 Owner'S Handbook Manual Download

Page: 173 / 205

LOTUS FEDERAL EMISSION CONTROL SYSTEM

WARRANTIES

The Lotus Emission Control System Warranties com-

prise an Emissions Defects Warranty and an Emissions

Performance Warranty. In both cases, the warranty period

shall begin on the date the car is delivered to its ultimate

purchaser, or if the car is ﬁrst placed in service as a ‘dem-

onstrator’ or ‘company’ car prior to delivery, on the date it

is ﬁrst placed into service.

EMISSIONS DEFECTS WARRANTY

Lotus Cars Ltd. (Lotus), warrants to the owner of any

new, USA speciﬁcation, Lotus Elise that:-

1) the car was designed, built and equipped so as to conform

at the time of sale, with applicable requirements of the U.S.

Environmental Protection Agency; and

2) is free from defects in materials and workmanship in Emis-

sion Related Components which could cause the car to fail

to conform with these requirements for a period of 2 years or

24,000 miles, whichever ﬁrst occurs, provided however, that in

the case of speciﬁed Major Emission Control Components, the

warranty period shall be 8 years or 80,000 miles, whichever

ﬁrst occurs.

A list of the Emissions Related Components to which

this Defects Warranty applies appears on page 178 to 179

(speciﬁed Major Emission Control Components are marked

with an asterisk).

This warranty does not cover failures caused by abuse,

neglect, collision accidents, improper maintenance, un-

authorised modiﬁcations; nor does it cover loss of time

inconvenience, loss of use of the car or incidental or con-

sequential damages.

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, APPLICABLE

TO A Car OR PART IS LIMITED IN DURATION TO THE TIME

l E

n W

171

oh_croft_InD.indd 171

20/05/2004 07:59:22

Summary of Contents for 2005 Elise














































































































































































































Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands

Lotus 2005 Elise, Owner'S Handbook Manual

Search results

Summary of Contents for 2005 Elise

Reviews:

Related manuals for 2005 Elise

Brands by name

Popular brands