manualshive.com logo in svg

Lotus 2005 Elise, Owner'S Handbook Manual

The Lotus 2005 Elise Owner's Handbook Manual is a comprehensive guide that provides detailed instructions and essential information about the iconic sports car. This manual is available for download absolutely free from our website, allowing you to access it anytime, anywhere. Get your hands on this essential manual today at manualshive.com.

Share
Download
background image

Turn Indicators: 

The turn indicators operate only with the ignition 

switched on. Move the lever down to indicate a left hand turn, 

and up for a right hand turn. The switch will be cancelled when 

the steering wheel is returned to the straight ahead position. 

For  convenience,  when  signalling  a  lane  change,  lightly 

pressing the switch up or down will allow its return under spring 

action.

Windscreen Wiper/Washer

The  steering  column  right  hand  lever  switch  controls  the 

windscreen wiper and washer, and is operative only with the 

ignition switched on.

NOTICE:

•  Never use the wiper on a dry screen. This may overload the 

mechanism and/or scratch the screen.

•  Ensure  that  snow  is  cleared  from  the  windscreen  before 

operating the wiper.

Windscreen  Wiper: 

The  wiper  is  controlled  by  the  up/down 

position of the lever switch, which operates as follows:

  Moved fully down, the wiper is switched off.

  Move up to the first position for intermittent wipe.

  The wiper will make one sweep about every five seconds.

  Select the next position for normal wiper operation.

  Move fully upwards for quick wipe, to be used only in heavy 

rain.

In

s

tr

u

me

n

ts & S

w

it

c

h

e

s

59

ohs33

Washer

Wiper

oh_croft_InD.indd   59

20/05/2004   07:58:55

Summary of Contents for 2005 Elise














































































































































































































Reviews:

No comments

Related manuals for 2005 Elise

Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Honda 2011 Civic Sedan Vehicle Instruction Card preview
2011 Civic Sedan
Brand: Honda Pages: 5
Suzuki 990E0-54P56-000 Installers And Users Instructions preview
990E0-54P56-000
Brand: Suzuki Pages: 12
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
Whispbar K951W Fitting Instructions For Basic Carrier preview
K951W
Brand: Whispbar Pages: 15
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Lantronix FOX3 Series Hardware Manual preview
FOX3 Series
Brand: Lantronix Pages: 51
Webasto HOLLANDIA 700 - 20 Series Service Manual preview
HOLLANDIA 700 - 20 Series
Brand: Webasto Pages: 30
Fleetwood Bounder turbo diesel 2001 Instructions Manual preview
Bounder turbo diesel 2001
Brand: Fleetwood Pages: 166
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23
Nav TV NTV-KIT041 Operation Instructions preview
NTV-KIT041
Brand: Nav TV Pages: 3

Brands by name

Popular brands

Load more brands