Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 215 / 878

Severity

Error

Serviceable

Automatically notify support

Alert Category

System - SSL certification

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0002

User Response

Make sure that the certificate that you are importing is correct and properly generated.

•

40000003-00000000 : Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3]. ()

This message is for the use case where a user modifies the Ethernet Port data rate.

May also be shown as 4000000300000000 or 0x4000000300000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0003

User Response

Information only; no action is required.

•

40000004-00000000 : Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3]. ()

This message is for the use case where A user modifies the Ethernet Port duplex setting.

May also be shown as 4000000400000000 or 0x4000000400000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

201

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands