Lenovo NeXtScale n1200 Installation And Service Manual Download Page 294

Page: 294 / 878

CPU1 VR OverTemp :

•

80070201-0302ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (CPU 2 OverTemp)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 800702010302ffff or 0x800702010302ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear

of the server), that the air baffles are in place and correctly installed, and that the server cover is
installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Features

and specifications for more information).

3. Make sure that the heat sink for microprocessor n is installed correctly.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

CPU2 VR OverTemp :

•

80070201-1101ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (PCI 1 Temp)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 800702011101ffff or 0x800702011101ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

280

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands