Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 300 / 878

None

•

8007020d-2b81ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (FDIMM Warranty)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 8007020d2b81ffff or 0x8007020d2b81ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

None

•

8007020f-2201ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (TXT ACM Module)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 8007020f2201ffff or 0x8007020f2201ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. If enabling TXT is not required, disable TXT from the Setup Utility.

2. If enabling TXT is required, verify that the TPM is enabled and activated from the Setup Utility.

3. If the problem remains, contact your service representative.

•

8007020f-2582ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (I/O Resources)

286

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands