Lenovo NeXtScale n1200 Installation And Service Manual Download Page 150

Page: 150 / 878

Figure 42. Hose assembly movement

Step 15. Continue to each chassis from the top chassis to the bottom chassis by reaching into each chassis

Location C and Location D quick connects and allow for a steady stream of water to flow. There
should be minimal air present in the sight glass.

Note:

Be sure to always close the valve on the blue hose before disconnecting it from one of the

chassis locations as you work your way down the rack.

Step 16. Once complete, go back to the front and connect the facility return hose to the rack return hose.

Fully open all connections on both the supply and return side. The manifold should be completely
filled.

136

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands