Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 746 / 878

– Latest level of DSA

•

180-901-000 : Check-point Panel Test Failed

Check-point Panel Test Failed. Operator reported incorrect display.

Recoverable

Severity

Error

Serviceable

Yes

Automatically notify support

User Response

Complete the following steps:

1. Check the operator information panel cabling for loose or broken connections at both ends or

damage to the cable.

2. Replace the information panel cable if damage is present.

3. Run the test again.

4. Replace the operator information panel assembly.

5. Run the test again.

6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service

Guide" for the next corrective action.

DSA CPU stress test results

The following messages can result when you run the CPU stress test.

Test results for the DSA CPU stress test

The following messages can result when you run the DSA CPU stress test.

•

089-000-000 : CPU Stress Test Passed

CPU Stress Test Passed.

Recoverable

Severity

Event

Serviceable

Automatically notify support

732

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands