Lenovo NeXtScale n1200 Installation And Service Manual Download Page 381

Page: 381 / 878

User Response

1. Run the hard disk drive diagnostic test on drive n.

2. Reseat the following components: a. Hard disk drive (wait 1 minute or more before reinstalling

the drive) b. Cable from the system board to the backplane

3. Replace the following components one at a time, in the order shown, restarting the server each

time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk drive
backplane (n = hard disk drive number)

•

806f020d-040affff : Failure Predicted on [StorageVolumeElementName] for array

[ComputerSystemElementName]. (1U Storage HDD1)

This message is for the use case when an implementation has detected an Array Failure is Predicted.

May also be shown as 806f020d040affff or 0x806f020d040affff

Severity

Warning

Serviceable

Yes

Automatically notify support

Yes

Alert Category

System - Predicted Failure

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0168

User Response

1. Run the hard disk drive diagnostic test on drive n.

2. Reseat the following components: a. Hard disk drive (wait 1 minute or more before reinstalling

the drive) b. Cable from the system board to the backplane

3. Replace the following components one at a time, in the order shown, restarting the server each

time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk drive
backplane (n = hard disk drive number)

•

806f020d-040bffff : Failure Predicted on [StorageVolumeElementName] for array

[ComputerSystemElementName]. (1U Storage HDD2)

This message is for the use case when an implementation has detected an Array Failure is Predicted.

May also be shown as 806f020d040bffff or 0x806f020d040bffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Yes

Alert Category

System - Predicted Failure

SNMP Trap ID

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

367

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands