Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 216 / 878

CIM Information

Prefix:

IMM

ID:

0004

User Response

Information only; no action is required.

•

40000005-00000000 : Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3]. ()

This message is for the use case where a user modifies the Ethernet Port MTU setting.

May also be shown as 4000000500000000 or 0x4000000500000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0005

User Response

Information only; no action is required.

•

40000006-00000000 : Ethernet locally administered MAC address modified from [arg1] to [arg2] by

user [arg3]. ()

This message is for the use case where a user modifies the Ethernet Port MAC address setting.

May also be shown as 4000000600000000 or 0x4000000600000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

none

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0006

User Response

Information only; no action is required.

•

40000007-00000000 : Ethernet interface [arg1] by user [arg2]. ()

This message is for the use case where a user enables or disabled the ethernet interface.

May also be shown as 4000000700000000 or 0x4000000700000000

Severity

202

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands