Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 754 / 878

EXA Port Ping Test Failed.

Recoverable

Severity

Error

Serviceable

Yes

Automatically notify support

User Response

Complete the following steps:

1. Remove power cables, wait for 45 seconds, reconnect and rerun the test.

2. Make sure that the scalability cable connections are as per specification.

3. Check scalability cables for loose connections.

4. Replace the scalability cable(s) for specified port(s).

5. If the problem remains, contact your technical-service representative.

DSA hard drive test results

The following messages can result when you run the hard drive test.

Test results for the DSA hard drive test

The following messages can result when you run the DSA hard drive test.

•

217-000-000 : HDD Test Passed

HDD Stress Test Passed.

Recoverable

Severity

Event

Serviceable

Automatically notify support

•

217-800-000 : HDD Test Aborted

HDD Test Aborted. The test was canceled.

Recoverable

740

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands