1. Turn off the server and disconnect the power cords. Reconnect the power cords and restart the
server.
2. If the problem remains, (trained technician only) replace the system board.
•
806f0107-0301ffff : An Over-Temperature Condition has been detected on
[ProcessorElementName]. (CPU 1)
This message is for the use case when an implementation has detected an Over-Temperature Condition
Detected for Processor.
May also be shown as 806f01070301ffff or 0x806f01070301ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
CIM Information
Prefix:
PLAT
ID:
0036
User Response
1. Make sure that the fans are operating. There are no obstructions to the airflow (front and rear of
the server), the air baffles are in place and correctly installed, and the server cover is installed and
completely closed.
2. Make sure that the heat sink for microprocessor n is installed correctly.
3. (Trained technician only) Replace microprocessor n. (n = microprocessor number)
•
806f0107-0302ffff : An Over-Temperature Condition has been detected on
[ProcessorElementName]. (CPU 2)
This message is for the use case when an implementation has detected an Over-Temperature Condition
Detected for Processor.
May also be shown as 806f01070302ffff or 0x806f01070302ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
CIM Information
Prefix:
PLAT
ID:
0036
User Response
Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages
325
Summary of Contents for NeXtScale n1200
