Lenovo NeXtScale n1200 Installation And Service Manual Download Page 464

Page: 464 / 878

2. Make sure that the SAS cable is connected correctly.

3. Replace the SAS cable.

4. Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f060d-040dffff : Array [ComputerSystemElementName] has failed. (1U Storage HDD4)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d040dffff or 0x806f060d040dffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

3. Replace the SAS cable.

4. Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f060d-040effff : Array [ComputerSystemElementName] has failed. (1U Storage HDD5)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d040effff or 0x806f060d040effff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

450

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands