Lenovo NeXtScale n1200 Installation And Service Manual Download Page 519

Page: 519 / 878

User Response

No action; information only.

•

81010701-3704ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (PCI Riser 1 Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107013704ffff or 0x810107013704ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010701-3705ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (PCI Riser 2 Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107013705ffff or 0x810107013705ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010701-3706ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (GPU Outlet Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107013706ffff or 0x810107013706ffff

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

505

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands