Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 153 / 878

Manifold retention bracket

Figure 47. Retention bracket installation

Removing a water-cooled technology tray from a chassis

Use this information to remove a water-cooled technology tray from a Lenovo NeXtScale n1200 Enclosure
Type 5468.

Before you remove a water-cooled technology tray, complete the following steps:

1. Read “Safety” on page v and “Installation guidelines” on page 28.

2. If the water-cooled technology tray is operating, shut down the operating system.

3. Press the power button to turn off both systems in the water-cooled technology tray (see “Turning off

the server” on page 19 for more information).

To remove the water-cooled technology tray from a chassis, complete the following steps:

Step 1. Open the front handles as shown in the illustration. The water-cooled technology tray moves out of

the tray bay approximately 0.6 cm (0.25 inch).

Chapter 6

Removing and replacing server components

139

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands