Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 549 / 878

Serviceable

Automatically notify support

Alert Category

System - Power On

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0107

User Response

No action; information only.

•

816f000d-0401ffff : The [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Comput HDD0 Pres)

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0401ffff or 0x816f000d0401ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0163

User Response

1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling

the drive.

2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest

level.

3. Check the SAS cable.

4. Replace the hard disk drive.

•

816f000d-0402ffff : The [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Comput HDD1 Pres)

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0402ffff or 0x816f000d0402ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

535

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands