Lenovo NeXtScale n1200 Installation And Service Manual Download Page 342 | Manualshive

Page: 342 / 878

background image

Yes

Alert Category

Critical - Memory

SNMP Trap ID

41

CIM Information

Prefix:

PLAT

ID:

0138

User Response

Note: Each time you install or remove a DIMM, you must disconnect the server from the power
source; then, wait 10 seconds before restarting the server.

1. Refer to TIP H212293 for minimum code level.

2. Check the Lenovo support website for an applicable retain tip or firmware update that applies to

this memory error.

3. Swap the affected DIMMs (as indicated by the error LEDs on the system board or the event logs)

to a different memory channel or microprocessor.

4. If the problem follows the DIMM, replace the failing DIMM.

5. (Trained technician only) If the problem occurs on the same DIMM connector, check the DIMM

connector. If the connector contains any foreign material or is damaged, replace the system
board.

6. (Trained technician only) Remove the affected microprocessor and check the microprocessor

socket pins for any damaged pins. If a damage is found, replace the system board.

7. (Trained technician only) Replace the affected microprocessor.

8. Manually re-enable all affected DIMMs if the server firmware version is older than UEFI v1.10. If

the server firmware version is UEFI v1.10 or newer, disconnect and reconnect the server to the
power source and restart the server.

9. (Trained Service technician only) Replace the affected microprocessor.

•

806f010c-2003ffff : Uncorrectable error detected for [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 3)

This message is for the use case when an implementation has detected a Memory uncorrectable error.

May also be shown as 806f010c2003ffff or 0x806f010c2003ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Memory

SNMP Trap ID

41

CIM Information

Prefix:

PLAT

ID:

0138

User Response

Note: Each time you install or remove a DIMM, you must disconnect the server from the power
source; then, wait 10 seconds before restarting the server.

328

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

«
...
340
341
342
343
344
...
»

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NeXtScale n1200

Brand: Tyco Electronics Pages: 8

COSHH Cranelift Drum Store

Brand: Conquip Pages: 6

Brand: Niles Pages: 4

Brand: Tranberg Pages: 8

Brand: Aukey Pages: 18

Brand: i-Stor Pages: 14

Brand: Zaber Technologies Inc. Pages: 39

Brand: Natec Pages: 20

Mini-OTE 300 Tap

Brand: CommScope Pages: 10

HDX-SSD - REFERENCE ISSUE 1

Brand: NAIM Pages: 28

Brand: LaCie Pages: 41

Brand: Panduit Pages: 11

Brand: Dantherm Pages: 76

Brand: HP Pages: 9

Brand: Sharkoon Pages: 9

Brand: Rockford Fosgate Pages: 4

Brand: Positron Pages: 2

Brand: Sandberg Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands