Lenovo NeXtScale n1200 Installation And Service Manual Download Page 532

Page: 532 / 878

CIM Information

Prefix:

PLAT

ID:

0521

User Response

No action; information only.

•

8107010d-2b81ffff : Sensor [SensorElementName] has deasserted the transition from normal to

non-critical state. (FDIMM Warranty)

This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.

May also be shown as 8107010d2b81ffff or 0x8107010d2b81ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0521

User Response

No action; information only.

•

8107010f-2201ffff : Sensor [SensorElementName] has deasserted the transition from normal to

non-critical state. (GPT Status)

This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.

May also be shown as 8107010f2201ffff or 0x8107010f2201ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0521

User Response

No action; information only.

518

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands