Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 469 / 878

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

3. Replace the SAS cable.

4. Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f060d-0417ffff : Array [ComputerSystemElementName] has failed. (SDHV Drive 8)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0417ffff or 0x806f060d0417ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

3. Replace the SAS cable.

4. Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f060d-0418ffff : Array [ComputerSystemElementName] has failed. (SDHV Drive 9)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0418ffff or 0x806f060d0418ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

455

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands