Lenovo NeXtScale n1200 Installation And Service Manual Download

Page: 550 / 878

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0163

User Response

1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling

the drive.

2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest

level.

3. Check the SAS cable.

4. Replace the hard disk drive.

•

816f000d-0403ffff : The [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Comput HDD2 Pres)

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0403ffff or 0x816f000d0403ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0163

User Response

1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling

the drive.

2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest

level.

3. Check the SAS cable.

4. Replace the hard disk drive.

•

816f000d-0404ffff : The [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Comput HDD3 Pres)

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0404ffff or 0x816f000d0404ffff

Severity

Error

536

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands