Lenovo NeXtScale n1200 Installation And Service Manual Download Page 304

Page: 304 / 878

Prefix:

PLAT

ID:

0522

User Response

None ME Flash Error :

•

80070301-0301ffff : Sensor [SensorElementName] has transitioned to non-recoverable from a less

severe state. (CPU 1 OverTemp)

This message is for the use case when an implementation has detected a Sensor transitioned to non-
recoverable from less severe.

May also be shown as 800703010301ffff or 0x800703010301ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0524

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear

of the server), that the air baffle is in place and correctly installed, and that the server cover is
installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

CPU1 VR OverTemp :

•

80070301-0302ffff : Sensor [SensorElementName] has transitioned to non-recoverable from a less

severe state. (CPU 2 OverTemp)

This message is for the use case when an implementation has detected a Sensor transitioned to non-
recoverable from less severe.

May also be shown as 800703010302ffff or 0x800703010302ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

290

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands