Lenovo NeXtScale n1200 Installation And Service Manual Download Page 439

Page: 439 / 878

3. Replace the SAS cable.

4. Check backplane cable connection.

5. Replace the RAID adapter.

6. Replace the hard disk drive that is indicated by a lit status LED.

•

806f050d-0402ffff : Array [ComputerSystemElementName] is in critical condition. (Computer HDD1)

This message is for the use case when an implementation has detected that an Array is Critical.

May also be shown as 806f050d0402ffff or 0x806f050d0402ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0174

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

3. Replace the SAS cable.

4. Check backplane cable connection.

5. Replace the RAID adapter.

6. Replace the hard disk drive that is indicated by a lit status LED.

•

806f050d-0403ffff : Array [ComputerSystemElementName] is in critical condition. (Computer HDD2)

This message is for the use case when an implementation has detected that an Array is Critical.

May also be shown as 806f050d0403ffff or 0x806f050d0403ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0174

User Response

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

425

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands