Lenovo NeXtScale n1200 Installation And Service Manual Download Page 277

Page: 277 / 878

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010901-2d01ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

asserted. (PCH Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

May also be shown as 800109012d01ffff or 0x800109012d01ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0494

User Response

1. Make sure that the water loop is operating, the relevant water tubes are in place and correctly

installed, and that the server cover is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010901-3701ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

asserted. (Ambient Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

May also be shown as 800109013701ffff or 0x800109013701ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0494

User Response

Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages

263

Summary of Contents for NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands

Lenovo NeXtScale n1200, Installation And Service Manual

Search results

Summary of Contents for NeXtScale n1200

Reviews:

Related manuals for NeXtScale n1200

Brands by name

Popular brands