![background image](http://html.mh-extra.com/html/national-instruments/wsn-3294/wsn-3294_installation-manual_709638001.webp)
INSTALLATION GUIDE
NI WSN-3294 Outdoor IP Enclosure
For NI WSN-9791 Ethernet Gateway
This installation guide describes how to install and use the National Instruments WSN-3294 outdoor IP
enclosure. The NI WSN-3294 outdoor IP enclosure is an accessory that provides NI WSN-9791 devices
with a minimum ingress protection (IP) rating of IP65 against dust and water in harsh outdoor or
industrial environments. For more information about IP ratings, refer to the
section. For
the NI WSN-9791 device specifications, refer to the
device user guides
available at
ni.com/manuals
.
Figure 1 shows the NI WSN-3294 outdoor IP enclosure components.
Figure 1.
NI WSN-3294 Outdoor IP Enclosure Components
Note
You need a #1 flat and a #2 Phillips screwdriver to install the NI WSN-3294.
The NI WSN-3294 kit includes the following items:
•
NI WSN-3294
•
Two M16 gland shells
•
Two gland inserts, standard size
•
Two gland inserts, reduced size
•
Two gland plugs
•
Two lock nuts
•
Two 8-32 screws
•
2.4 GHz antenna
•
IP Boot
•
IP Sleeve
1
IP Sleeve
2
Antenna
3
Lock Nuts
4
Gland Inserts, Reduced
5
Gland Plugs
6
Gland Inserts, Standard
7
Gland Shells
8
Antenna Wire Connector
9
IP Boot
10 8-32 Screws
11 No-Crimp Ethernet Plug
3
4
1
2
7
9
10
8
11
6
5