©
National Instruments Corporation
3
NI WSN-3294 Outdoor IP Enclosure Installation Guide
Figure 3.
NI WSN-3294 Mounting Hole Dimensions and Locations
Setting Up and Installing the NI WSN-3294
Complete the following steps to set up and install the NI WSN-3294:
Step 1: Unpack and Inspect the Kit Contents
Remove the device from the package and inspect the device and kit contents. Contact NI if the device
appears damaged. Do
not
install a damaged device or use kit contents that appear damaged.
Step 2: Unscrew and Detach the NI WSN-3294 Cover
The cover of the NI WSN-3294 is equipped with captive screws. Use a #2 Phillips screwdriver to remove
the cover.
Step 3: Connect Antenna Wire Connector
The NI WSN-3294 ships with an internal antenna cable to connect the NI WSN-9791 device to the IP
rated antenna connector on the inside of the NI WSN-3294.
6.
3
mm
(4X Ø 0.24
8
in.)
8
2 mm
(
3
.22
8
in.)
204 mm
(
8
.0
3
1 in.)
